Serving Aurora, King City, Stouffville & Ballantrae

Free written estimates · +1 289-307-8659

Aurora Rubber Surfacing

Aurora, Ontario ยท On The Oak Ridges Moraine

Rubber Surfacing In Aurora, Ontario

  • Free written quotes, nothing owed
  • Product, thickness and area on every quote
  • Serving Aurora, King City, Stouffville and Ballantrae

Aurora Rubber Surfacing Puts A New Surface Over The Old One

Aurora Rubber Surfacing supplies and installs poured rubber surfacing for pool surrounds, patios, garage floors, driveways, steps, playgrounds and fitness rooms across Aurora and the townships either side of it. We are fully insured for every job we take on. Preparation is where a rubber surface succeeds or fails, so every quote starts with a close look at the slab, and the product, thickness and area are all written down before a price is given.

Call +1 289-307-8659.

Book your free site visit

Say which surface needs rubber and estimate its size. We measure, inspect the slab, and you keep the written specification. Or call +1 289-307-8659.

Thanks — your request has been received. We will get back to you the same working day. For anything urgent, call +1 289-307-8659.

No charge, no obligation. You will hear from us the same working day.

Why Us

Why Choose Us For Rubber Surfacing In Aurora?

A rubber surface and a badly poured rubber surface look identical on the day they are finished. The difference shows a year or two later, when one is still bonded and the other is lifting at the edges. What separates them is what happened to the slab before the rubber went on: whether it was clean, whether it was dry, whether an old sealer was ground off, and whether the mix was measured. We spend more of the job on that preparation than on the pour, and the about page sets out how.

Aurora sits on the Oak Ridges Moraine, and the sandy ground on the east side of town drains very differently from the clay pockets to the west. We check which one a slab sits on, because it changes how the slab moves and how thick the rubber should be.

What We Install

Surfaces We Take On

Six surfaces, six services. Pick whichever is closest and we take it from there.

Resort pool surround finished in light grey rubber surfacing with cabanas and palms

Pool Deck Surfacing

If the surround on your Aurora pool is cracked, slippery or simply tired, Aurora Rubber Surfacing pours rubber over the concrete or interlock you already have, and the deck is yours again within a day or two. We are fully insured for every job we take on.

View Pool Deck Surfacing
Installer troweling charcoal rubber surfacing across a garage floor with a bucket of granules beside him

Driveway and Garage Floor Surfacing

When the concrete under your car has started to flake in the tire tracks, Aurora Rubber Surfacing covers the garage floor or the driveway in poured rubber surfacing without breaking any of it out. Brine and oil stop at the rubber and never reach the slab, and on a January morning a tire has something to bite into. We are fully insured for every job we take on.

View Driveway and Garage Floor Surfacing
Installer troweling terracotta rubber surfacing around a tree in a school courtyard

Playground Safety Surfacing

If you look after a school, daycare, church, park or backyard playground in Aurora, Aurora Rubber Surfacing lays one-piece rubber surfacing under the equipment, as deep as the biggest climber needs, that softens a fall, drains, and never needs topping up. We are fully insured for every job we take on.

View Playground Safety Surfacing
Rooftop patio finished in grey rubber surfacing with lounge seating and a skyline behind

Patio, Walkway and Step Surfacing

Whether it is a stamped patio gone glassy, an interlock walk that has heaved, or front steps that ice over every November, Aurora Rubber Surfacing lays a single textured layer of rubber over what you already have, leaving every stone in place, and most jobs finish in a day. We are fully insured for every job we take on.

View Patio, Walkway and Step Surfacing
Installer troweling black rubber flooring across a fitness studio floor

Gym and Fitness Flooring

For your home gym, basement weight room, condo fitness room, school weight room or commercial studio in Aurora, Aurora Rubber Surfacing pours seamless rubber surfacing that absorbs a dropped weight, protects the slab under it, and keeps the noise from reaching the rest of the building. We are fully insured for every job we take on.

View Gym and Fitness Flooring
Installer in a hard hat troweling grey rubber surfacing on a high-rise balcony

Commercial and Equestrian Surfacing

For a storefront on Yonge, a clinic on Wellington, a condo balcony, a seniors' residence or a horse barn on the edge of town, Aurora Rubber Surfacing installs textured, seamless rubber surfacing in stages so your building never closes. Ice, mud and water do not cost it any grip, and a hose is all the cleaning it needs. We are fully insured for every job we take on.

View Commercial and Equestrian Surfacing
Benefits

What Are The Benefits Of Rubber Surfacing?

You keep the slab you have. The rubber is poured over it, and the cost and mess of ripping out a pool surround or a garage floor never enter the picture.

You get grip you can feel. The texture is part of the rubber, so a wet pool edge or a frosted step holds a foot.

You get a surface that moves with the ground. Cured rubber flexes with the seasonal shifts in an Aurora slab, where a hard overlay would split along the first crack.

You get colour that stays. Colour runs right through each granule, so a border or a design wears with the surface and never off it.

You get it back fast. Most residential pours are done in a day and used within two.

You keep tires out of landfill. The bulk of the material is recycled rubber.

You get it in writing. Product, thickness and area are on every quote, so you always know what went in.

Let Us Look Before You Decide

A short visit tells us what a photo cannot. You get a measurement, an inspection of the slab and a written specification, and none of it costs you anything.

Rubber surfacing information for Aurora property owners

Estate Pools In Aurora Have Old Surrounds

The large lots in Aurora Estates, the Hills of St Andrew and the rural south-east came with pools when they were built in the 1990s and 2000s, and the stamped concrete and interlock around them is now smooth, cracked at the corners and slippery. Pool deck rubber surfacing seals the surround, flexes with it through the winter, and gives wet feet grip at the coping, where the slips happen.

Garage Floors Flake Where The Car Drips Until Rubber Surfacing Goes On

Night after winter night the parked car drips salt brine onto one spot of garage floor, where it soaks in and freezes, and by the third or fourth winter that spot is flaking away. Driveway and garage floor rubber surfacing closes the slab off, so the brine dries on the rubber and you sweep it out in spring instead of losing another layer of concrete.

Front Steps On A Moraine Hill Ice Over Early Without Rubber Surfacing

Aurora sits higher than Toronto and gets its first frost earlier, and a north-facing concrete step in Aurora Heights or Aurora Highlands holds ice for months. With rubber surfacing for patios, walkways and steps, every tread gets a face a boot can hold, and one poured piece has no edge to lift.

Playgrounds Are Rated By The Tallest Structure

Play equipment is built to a height, and whatever is underneath it has to catch a child falling from the top. Our playground safety surfacing is a deep cushioning base under a coloured top, sized to the tallest structure on your site and recorded on your quote.

A Home Gym On A Thin Basement Slab Needs Cushioning

The basements in the newer houses on the north-east side of town have a thin slab over a vapour barrier, and a dropped barbell will crack it. Poured rubber gym and fitness flooring soaks up the impact, quiets the thud that carries upstairs, and has no seams for a toe or a bench leg to catch.

Commercial Entrances On Yonge And Wellington Take A Winter Of Wet Boots

A storefront on Yonge Street, a clinic on Wellington or an office off the 404 takes thousands of wet, salted boots every week through the winter, and a polished threshold is where somebody falls and a claim follows. Commercial and equestrian rubber surfacing wraps the entrance and the ramp in one textured layer, poured in sections so your doors stay open, and does the same job down a barn aisle on the horse farms at the edge of town.

Nothing Gets Demolished With Rubber Surfacing

What rubber surfacing saves you, above all, is the tear-out that never happens. Your cracked surround, worn patio or pitted garage floor is cleaned, patched, primed and kept as the base. A concrete crew would need a week to break it out, haul it off, form and pour. We need a day or two.

Sandy Ground East Of Yonge, Clay Pockets West Of It

The moraine under the east side of Aurora is sand and gravel that drains almost as fast as rain lands on it, so slabs there stay dry but can settle at the edges. Parts of the west side and the older streets sit on heavier ground that keeps water and heaves when it freezes hard, so slabs there move more and get checked harder for cracks that are still growing. We say which one your property is on before we quote.

An Old Sealer Will Lift New Rubber Surfacing

If a rubber surface peels, the usual culprit is a sealer somebody applied years ago and nobody removed. The rubber grips the sealer fine; the sealer is what lets go of the concrete. The visit includes a check for it, and if it turns up, grinding it off appears on your quote.

The Right Rubber For The Surface

Your garage, driveway or barn aisle wants black recycled rubber: it is the cheaper material and nobody is looking at it. Your pool surround, patio or playground wants coloured rubber, dearer but colourfast in sun for years. Coloured over black is how many people get both.

Our Process

What Happens During A Rubber Surfacing Job?

  1. First we come and look: the surface is measured and the slab is inspected for cracks, movement, damp and old sealer.

  2. Then you choose a colour, a finish and a thickness, and the three of them go on the written quote next to the price.

  3. Preparation comes next: cleaning, repairing the damaged spots, grinding away any coating, priming.

  4. Then the pour: rubber and binder blended on the spot and hand troweled to the thickness on your quote.

  5. Then a day or two of curing, and the surface is yours.

Service Area

Serving Aurora, King City, Stouffville And Ballantrae

Aurora Rubber Surfacing covers every part of town, from the Victorian streets around Yonge and Wellington and Town Park out to Aurora Heights and Aurora Highlands in the west, Bayview Wellington and Bayview Northeast in the east, the Hills of St Andrew, and the estate lots of Aurora Estates and the new streets going in on the north-east side. West of Bathurst, King City and Nobleton are regular calls, and so are Stouffville and Ballantrae across the moraine to the east.

Every address gets the visit and the written quote free. The full list is on our services page, or reach us here to set up a time.

Get One Price In Writing

Use the form or call +1 289-307-8659. We measure your surface, pick the rubber and the thickness to suit it, and write a single fixed price.

Answers

Frequently Asked Questions

That depends on how much surface there is, what state it is in, and how much work it takes to get it ready. Grinding off a sealer or repairing a settled corner adds to the price in a way a flat rate would hide, and that is why you will never get a per-foot rate from us over the phone. After measuring and working out the preparation, you get a single fixed figure in writing, and the visit costs you nothing.

Usually not. Hairline cracks and flaking are what rubber surfacing is for, provided they have stopped growing. If a crack is still opening every year the ground underneath is on the move, and that has to be sorted before anything goes on top.

Many, if it was prepared properly. Preparation, not the rubber, is what decides it, which is why so much of the job happens before the pour. At the visit we will tell you what to expect for your own surround.

Yes, without lifting a single paver. Rubber surfacing takes to interlock, stamped concrete and plain concrete alike when the base is sound, and we check the base before you get a quote.

The day after the pour. Cars and heavy use wait until the second day, and a deep playground pour may need a little more. The exact timing is yours before the job starts.

Free Estimate

Ask For A Written Quote

Whatever you tell us about your surface makes the first visit more useful, but only two things are compulsory: your name and a number to call. If you would sooner talk, the number is +1 289-307-8659.

Thanks — your request has been received. We will get back to you the same working day. For anything urgent, call +1 289-307-8659.

Fields marked are required. Stars mark the two things we cannot proceed without.

Call Now Get a Free Quote